*Mar 17 14:18:13.019: %TRACKING-5-STATE: 200 ip sla 200 reachability Up-> Down. This is how some show command outputs looks like: ROUTER-MD#show ...
To verify the track status use the use the show track command as shown below: R1# show track. Track 1. IP SLA 1 reachability. Reachability is Down 1 change ...
To display tracking activity for tracked objects, use the debug track
Hence if the track status is down the last route will be used to forward all
When Track 8 is DOWN, Traffic to the Internet flows through ISP 2.
Router#show track brief Track Object Parameter Value 10 interface Serial0/0 line -protocol Down (hw down) 11 ip route 10.2.95.0/24 reachability Up (EIGRP) 12 ...
track 1 ip sla 1 reachability
... to down R4(config-if)# # Verify Track status on ASA ASA# show track Track 1 Response Time Reporter 101 reachability Reachability is Down ...
20 down 10 Dell(conf-track-104)#end Dell#show track 104 Track 104 IP route 10.0.0.0/8 ...
But 'state' and 'reachability' are so similar, I'm not sure. ip+sla3.jpg. R1#. R1# show run | sec track. track 2 ip sla 11. delay down 45 up 45. ip route 10.1.234.0 ...